Repair TipsLocal Guides

Why is my roof leaking around the chimney?

A chimney leak in Houston almost always traces back to failed flashing, not the roof itself. Here is why it happens, how a roofer diagnoses it, and when to call.

Skilled roofer installing asphalt shingles, ensuring quality home renovation.

The short answer: your chimney flashing has failed

A roof leaking around the chimney is almost always caused by failed flashing — the metal and sealant system that seals the joint where the chimney meets the roof. The chimney is the largest penetration on most Houston roofs, and the flashing around it is the most complex detail on the roof. When it fails, water runs down the chimney and into the attic, and the stain shows up on the ceiling beside the chimney, or on the chimney breast itself.

How chimney flashing works (and why it fails in Houston)

Chimney flashing is two layers working together. Step flashing is a series of small L-shaped metal pieces woven into the shingles up each side of the chimney, directing water down and away. Counter-flashing is set into the chimney mortar joints and folded down over the step flashing, so water running down the chimney face is caught and sent onto the roof.

In Houston it fails for three reasons. Heat expands and contracts the metal and cracks the sealant. Mortar joints crumble, and the counter-flashing loses its grip. And wind-driven rain — the May 2024 derecho brought straight-line winds near 100 mph to downtown Houston — pushes water under flashing that holds fine in light rain. Once the counter-flashing lifts, every rain sends water behind the step flashing and into the attic.

The five most common causes of a chimney leak in Houston

  • Failed counter-flashing. Mortar joints crumble, the counter-flashing lifts, and water runs down the chimney face behind the step flashing.
  • Missing or failed saddle (cricket). On the uphill side of a wide chimney, water ponds without a saddle to divert it. A chimney wider than 30 inches needs one.
  • Cracked step flashing. Heat and movement crack the metal or the sealant at the joints, and wind-driven rain finds the crack.
  • Failed sealant. Sealant is not flashing — it is a backup. When the flashing has failed, re-caulking the joint buys weeks, not years.
  • Clogged valleys above the chimney. Pine needles and oak leaves pack the valley feeding the chimney, and the backed-up water finds the flashing.

How to tell if the leak is the chimney or the roof

The stain’s location is the first clue: a stain on the ceiling beside the chimney, or damp on the chimney breast, points to the flashing. A stain further away is more likely a valley, a skylight, or a shingle problem. But the only certain answer comes from the attic and the roof: a roofer looks for water tracks on the rafters and the decking, checks the counter-flashing’s grip in the mortar, and checks whether the chimney has a saddle.

We do not guess from the ground. The diagnosis is a roofer on the roof, with photos of the flashing, the mortar and the valley above the chimney.

What chimney leak repair in Houston costs in 2026

It depends on what has failed. Published Angi Houston data (updated 9 July 2026) puts flashing repair at $200–$500 as a market range, and one Houston contractor lists wall and chimney flashing work at $1,200–$1,500 — the difference is scope: a sealant touch-up is not the same job as re-flashing a chimney with a new saddle. Those are published market figures, not this business’s prices.

We inspect first and put the scope in writing: whether the counter-flashing needs re-setting, whether a saddle is needed, and whether the decking around the chimney is sound. A chimney leak quoted without looking at the flashing is a guess.

Common mistakes homeowners make with a chimney leak

  • Re-caulking the joint. Sealant over failed flashing is a patch that fails in the first hot week. The flashing has to be fixed, not covered.
  • Sealing from inside the attic. Sealant in the attic traps water in the deck and rots it faster.
  • Ignoring the saddle. A wide chimney without a saddle ponds water on its uphill side. No amount of sealant fixes a missing saddle.
  • Waiting for it to dry out. A chimney leak that stops when the rain stops has not fixed itself. The flashing is still failed, and the deck is still wet.

When to call a professional

Call a roofer as soon as you see staining beside the chimney or damp on the chimney breast. Chimney flashing is a specialist detail, and the longer water runs behind it, the more decking it rots. Call Thomas Family Roofing at (936) 873-7200 or see our roof leak repair page.

Frequently Asked Questions

Why is my roof leaking around the chimney in Houston?

Failed flashing — usually the counter-flashing losing its grip in crumbling mortar, or a missing saddle on a wide chimney. The chimney is the largest penetration on most Houston roofs and its flashing is the most complex detail.

Can a chimney leak be fixed with sealant?

No — not for long. Sealant is a backup, not flashing. When the flashing has failed, re-caulking buys weeks. The flashing has to be re-set or replaced.

How much does chimney leak repair cost in Houston?

Published Angi Houston data (updated 9 July 2026) puts flashing repair at $200–$500 as a market range; one Houston contractor lists wall and chimney flashing at $1,200–$1,500. The scope decides the number — these are published figures, not our prices.

Does my chimney need a saddle or cricket?

A chimney wider than 30 inches needs a saddle on its uphill side to divert water. Without one, water ponds against the chimney and finds the flashing.

Get help with Roofing in Houston

Call Thomas Family Roofing at (936) 873-7200 and tell us what your roof is doing — we will give you a straight answer and a written scope. Or send a message through the contact page.

Tagged with
#chimney leak#roof flashing#houston roofing#roof repair#water damage
Frequently asked questions

Common questions

Why is my roof leaking around the chimney in Houston?

Failed flashing — usually the counter-flashing losing its grip in crumbling mortar, or a missing saddle on a wide chimney. The chimney is the largest penetration on most Houston roofs and its flashing is the most complex detail.

Can a chimney leak be fixed with sealant?

No — not for long. Sealant is a backup, not flashing. When the flashing has failed, re-caulking buys weeks. The flashing has to be re-set or replaced.

How much does chimney leak repair cost in Houston?

Published Angi Houston data (updated 9 July 2026) puts flashing repair at $200–$500 as a market range; one Houston contractor lists wall and chimney flashing at $1,200–$1,500. The scope decides the number — these are published figures, not our prices.

Does my chimney need a saddle or cricket?

A chimney wider than 30 inches needs a saddle on its uphill side to divert water. Without one, water ponds against the chimney and finds the flashing.

Need help with your property?

Stop your chimney leak before the next Houston storm.

Thomas Family Roofing finds the failed flashing and fixes it at the source. Call (936) 873-7200.

Call now