Standing seam metal roof on a Houston home
Standing seam · Stone-coated steel · Premium pitched alternative

Metal Roofing in Houston, TX: Standing Seam & Stone-Coated Steel

Standing seam metal is the premium pitched roof in Houston, and it is growing on new custom builds in Memorial, River Oaks, and Tanglewood. It sheds rain, holds up to wind, and lasts far longer than shingles, but it is only as good as its seams, its flashing, and its fastening. Metal roofing in Houston means naming the system before naming a price. Start with a roof inspection and a written scope.

Standing seam and stone-coated steelWind uplift checkedWritten scope before work

Focused arrival windows

Useful updates and clear arrival timing.

Clear scope before work

Review the approach and price before deciding.

Prepared, clean crews

Equipped vehicles and respectful cleanup.

Local accountability

Neighbors serving neighbors with follow-through.

What is included

What is included in metal roofing

A metal roof is a system: panels, seams, clips, flashing, underlayment, and ventilation. Here is what is part of the job.

01

Standing seam panels

Concealed fasteners, raised seams, and clips that let the panels move with heat. The standing seam roof Houston custom builds carry most.

02

Stone-coated steel

Steel panels with a stone-chip coating, shaped like shingle or tile. The premium pitched alternative where the look of shingle or tile is wanted with steel underneath.

03

Underlayment and membrane

Underlayment across the field, with a self-adhering membrane at valleys, eaves, and around penetrations.

04

New flashing and drip edge

Chimney flashing, vent flashing, and drip edge are replaced, not reused. On a metal roof, flashing is where most leaks start.

05

Wind uplift and fastening

Clips, fasteners, and edge details are suited to the wind exposure of the house. Wind uplift is a topic on every metal scope.

06

Balanced ventilation

Ridge vent paired with soffit intake. A metal roof still needs the attic to breathe.

PLAN

Call to talk through a metal roof

Tell us the house, the slope, and what the roof is doing. We will talk through the next step and what an inspection covers.

Call (936) 873-7200
Service overview

What metal roofing in Houston actually involves

Metal roofing in Houston is standing seam and stone-coated steel, installed as a system. The panels are the visible layer. The clips, seams, flashing, underlayment, and ventilation underneath them are what decide whether the roof holds through hurricane season.

Standing seam metal in Texas runs $8 to $22 per sq ft of roof surface across published sources, a wide spread driven by gauge, finish, and panel system. Angi Houston puts a metal roof at about $10,995 on average, and about $11 per sq ft for common coated steel. The page must name the system before naming a price, and these are published market ranges, not this business's prices. Your price depends on the system, the gauge, the finish, and the roof, and is set out in a written scope after an inspection.

The market is the custom build. Standing seam and stone-coated steel are growing on new custom builds in Memorial, River Oaks, and Tanglewood, and on modern infill in the Heights and Montrose. The roofs are steep, complex, and visible, which is why the flashing and seam work matters more than the panel brand.

  • Standing seam — concealed fasteners and raised seams. The metal roof Houston custom builds carry most.
  • Stone-coated steel — steel panels with a stone-chip coating, shaped like shingle or tile.
  • Premium pitched alternative — metal costs more than shingles and lasts far longer. Texas sources put metal life at 40 to 70 years.
  • Wind uplift — clips, fasteners, and edge details are suited to the wind exposure of the house. Wind uplift is a topic on every metal scope.
  • Memorial, River Oaks, Tanglewood — the custom-build streets where metal is growing fastest in Houston.
  • Flashing is the leak point — on a metal roof, most leaks start at flashing, penetrations, and panel transitions, not at the panels.
  • No licence to check — Texas has no state roofing licence. HB 3344, the bill that would have created one, died on 8 May 2025.
  • Start with an inspection — a roof inspection with a photo and video report tells you whether repair or replacement is the honest answer.
Roofing crew installing a roof in Houston
Metal roofs are only as good as their seams and flashing.
The service timeline

How a metal roofing job works

01

Inspection and scope

We walk the roof, check seams, clips, flashing, and penetrations, and photograph what we find. You get a written scope with the system, the gauge, and the work included.

02

System choice

Standing seam or stone-coated steel, chosen for the house, the slope, and the look. The system is named before any price is discussed.

03

Permit

A re-roof inside the city needs a City of Houston Residential Roofing Permit, about 10 business days. The permit is part of the written scope.

04

Install

Old material comes off to the deck, soft sheathing is replaced, and the new system goes on: underlayment, membrane, flashing, clips, and panels.

05

Walkthrough and photos

We walk the roof and the yard with you and hand over the photos of the deck, seams, and flashing details for your records.

Wind damage roof repair work in Houston
Tools and methods

Tools and methods we use on metal roofs

01

Seaming tool

Folds standing seam panels together so the seam is weather-tight.

02

Metal snips and nibbler

Cut panels cleanly at valleys, hips, and penetrations.

03

Moisture meter

Checks the deck and attic for hidden moisture before new panels go on.

04

Chalk line and utility knife

Keep panel courses straight and cut clean edges.

05

Magnetic sweeper

Picks up fasteners and offcuts from the yard and driveway.

06

Ladder and roof brackets

Safe access and staging across steep roof planes.

07

Caulk gun and sealant

Seals flashing joints and penetrations as part of the work.

08

Tape measure and square

Every panel, valley, and flashing bend is measured to the roof in front of us.

09

Tarps and ground protection

Landscaping and the driveway are covered before tear-off starts.

10

Camera and written report

Photos of the deck, seams, and finished roof go into your file.

Where this service helps

When Houston homeowners call us for metal roofing

Roofing work in Memorial, Houston

A Memorial custom build with a standing seam roof.

The owners wanted a roof that would hold through hurricane season and outlast the shingles around it. We installed a standing seam system with clips suited to the wind exposure and new flashing throughout.

A River Oaks home with a metal roof repair.

Flashing at a chimney had failed and water was tracking under the panels. We replaced the flashing, re-seated the panels, and photographed the work for the file.

A Heights modern infill with a stone-coated steel roof.

The owners wanted the look of shingle with steel underneath. We installed stone-coated steel panels with new flashing and balanced ventilation.

Local execution

How metal roofing runs across Houston

Metal is the premium pitched roof, and its streets are the custom-build streets: Memorial, River Oaks, Tanglewood, and modern infill in the Heights and Montrose. The roofs are steep and complex, and the flashing work matters more than the panel choice. Wind uplift is the topic on every metal scope, because a metal roof that lifts at the edge fails fast. Call (936) 873-7200 to talk through a metal roof.

01

Memorial

New custom builds and mid-century restorations carry standing seam metal and flat TPO, often on the same house.

02

River Oaks

Slate, clay tile, copper, and standing seam metal, with property owners association review before any material or colour change.

03

Tanglewood

Custom builds on large lots, where metal is the premium pitched alternative to shingles.

04

The Heights

Standing seam metal on modern infill, beside 1920s bungalows with shingle roofs.

05

Montrose

Metal on modern infill townhomes, with flat TPO decks and rooftop terraces alongside.

06

Wind uplift

clips, fasteners, and edge details are suited to the wind exposure of the house.

07

Hurricane-season wind

the season runs 1 June to 30 November, peaking in the second week of September. We document wind damage with photos.

Before and after

What metal roofing changes

Memorial custom build, standing seam

Before

A new custom build that needed a roof to hold through hurricane season and outlast the shingles around it.

After

We installed a standing seam system with clips suited to the wind exposure and new flashing throughout.

Maintenance: Walk the roof after any tropical storm. Check seams and flashing at the edges first.

River Oaks metal repair

Before

Flashing at a chimney had failed and water was tracking under the panels.

After

We replaced the flashing, re-seated the panels, and photographed the work for the file.

Maintenance: Check flashing at chimneys and penetrations each year. On a metal roof, flashing is the leak point.

Heights stone-coated steel

Before

Owners who wanted the look of shingle with steel underneath on a modern infill home.

After

We installed stone-coated steel panels with new flashing and balanced ventilation.

Maintenance: Keep valleys and gutters clear. Debris holds water against any roof, metal included.

Problems we solve

Problems metal roofing in Houston solves

Metal roof problems in Houston trace back to seams, flashing, and fastening. Here is what we fix.

01

Leaks at flashing and penetrations

On a metal roof, most leaks start at chimney flashing, vent boots, and panel transitions, not at the panels. We replace flashing and re-seat panels where the roof has life left.

02

Wind uplift at the edges

Wind works on the edges and corners of a metal roof first. We check clips, fasteners, and edge details on every inspection and say what we find.

03

Shingles aging out early

Houston heat shortens shingle life to roughly 18 to 25 years. A metal roof is the premium alternative for owners who want a longer-lived pitched roof.

04

A roof that does not match the house

Stone-coated steel gives the look of shingle or tile with steel underneath, for houses where the streetscape matters.

Proof behind the promise

What Houston homeowners say about us

4.9 out of 5Google rating, 46 reviews
42 five-star reviewsGoogle, of 46 reviews in total
4 four-star reviewsGoogle, of 46 reviews in total
Photo and video reportEvery inspection is documented so you can see what we saw
Written scope before workWhat will be done, and what it covers, in writing first
Phone-first, one numberCall (936) 873-7200 — the same number on our Google profile
Thomas Family Roofing, your local roofing team
Technical expertise

Metal roofing experience you can verify

Our crews install metal roofs across Harris County every week, from custom builds in Memorial to modern infill in the Heights. Every install is photographed at the deck, seam, and flashing stages, and the permit inspection is part of the job. That is what a homeowner can actually check: the photos, the permit, and the written scope.

  • Standing seam and stone-coated steel, named before any price is discussed
  • New flashing and drip edge on every install, never reused
  • Clips and fasteners suited to the wind exposure of the house
  • City of Houston permit and inspection handled as part of the written scope
  • Photo and video report of the deck, seams, and finished roof for your records
Roofer preparing equipment for a Houston job
Customer stories

What Houston homeowners say

Chelsea Powell★★★★★ · 3 months ago · Google review

“We contacted Thomas Family Roofing for an estimate on repairs for our metal roof in Houston. Luis came out, inspected the roof in person, and explained clearly what needed attention, including a few details about flashing and panel areas that other roofers had missed.”

Read this review on Google

bryan ball★★★★★ · 4 months ago · Google review

“From our first call with Thomas Family Roofing, it was clear they were focused on giving us a quality new roof and making the whole roofing process easy to understand.”

Read this review on Google

Leonardo A★★★★★ · 4 months ago · Google review

“They replaced an old cracked skylight on the roof of my two-story home, and I was very pleased with the whole roofing process. From the first call back to the roof inspection, estimate, and final installation, everything was handled on time.”

Read this review on Google

Rating 4.9 out of 5 from 46 Google reviews (42 five-star, 4 four-star). A further 41 reviews are visible only as an aggregate on Google. See all reviews on Google.

How much does a metal roof cost in Houston?

Standing seam metal in Texas runs $8 to $22 per sq ft of roof surface across published sources, driven by gauge, finish, and panel system. Angi Houston puts a metal roof at about $10,995 on average. These are published market ranges, not this business's prices.

How long does a metal roof last in Houston?

Texas sources put metal roof life at 40 to 70 years, against roughly 18 to 25 years for architectural shingles in Houston. The seams, flashing, and fastening decide whether the roof reaches that life.

Is standing seam better than stone-coated steel?

They suit different houses. Standing seam has concealed fasteners and raised seams. Stone-coated steel is shaped like shingle or tile. The choice is made for the house, the slope, and the look, and written into the scope.

Do I need a permit for a metal re-roof in Houston?

A City of Houston Residential Roofing Permit is required for a re-roof or overlay inside the city — plan review and inspection, a $33.56 admin fee, about 10 business days, valid 6 months. Roof covering of 100 sq ft or less in aggregate is exempt. In unincorporated Harris County there is no residential roofing permit.

Frequently asked questions

Metal Roofing questions Houston homeowners ask

Not seeing your question? Call (936) 873-7200 and talk it through with the local team.

Ask the local team
Houston rooftops at dusk
Here when the problem will not wait

Talk through a metal roof

Call (936) 873-7200 and tell us the house, the slope, and what the roof is doing. We will talk through the next step and what an inspection covers.

Contact the local team

Call Thomas Family Roofing

Call (936) 873-7200 and tell us what you are seeing. We will talk through what is happening, what an inspection covers, and the next step. Or send a service request with the form and we will call you back.

Request received. We will be in touch shortly.

Call now