Focused arrival windows
Useful updates and clear arrival timing.
EPDM is the rubber membrane on Houston flat roofs, a single sheet of synthetic rubber that flexes with heat and holds up to ponding better than most membranes. It fits where the roof is simple, the penetrations are few, and the seams can be kept dry. EPDM roofing in Houston means the membrane, the seams, and the drains, scoped together. Start with a roof inspection and a written scope. See also TPO roofing for the comparison.
Useful updates and clear arrival timing.
Review the approach and price before deciding.
Equipped vehicles and respectful cleanup.
Neighbors serving neighbors with follow-through.
An EPDM roof is a system: membrane, insulation, drainage, flashing, and parapets. Here is what is part of the job.
A single sheet of synthetic rubber, usually black. It flexes with heat and holds up to ponding better than most membranes.
EPDM seams are glued or taped, not welded. The seam work is the craft on an EPDM roof, and it is checked on every job.
Re-slopes the roof so water moves to the drains. Even a membrane that tolerates ponding lasts longer when it sheds water.
Checked and sized for the roof area. Undersized drains are a common find on townhome flat roofs.
Parapet walls, coping, and penetrations are flashed as part of the system. A membrane is only as good as its edges.
The deck and insulation are inspected before any new membrane goes on. A new membrane over a wet deck is money wasted.
Tell us the building, the membrane, and what the roof is doing. We will talk through the next step and what an inspection covers.
EPDM roofing in Houston is a rubber membrane on flat roofs where it fits: simple roof planes, few penetrations, and seams that can be kept dry. It is the quieter of the two single-ply membranes, and the choice is made for the roof, not for the brochure.
The comparison homeowners ask for is EPDM versus TPO. EPDM is a rubber membrane with glued or taped seams, usually black, and it absorbs heat. TPO is heat-welded at the seams and white, so it reflects summer sun. Published Texas sources put EPDM at $4 to $8 per sq ft in one range and $11 to $16 in another, a gap that comes from different scopes, not error. These are published market ranges, not this business's prices. The scope is labelled every time. See the TPO roofing page for the other side of the comparison.
EPDM fits where the roof is simple. A townhome flat deck with few penetrations, a bungalow addition with a straightforward membrane, or a small commercial roof where the seams can be kept dry. Where the roof is complex, with many penetrations and parapet transitions, a welded-seam membrane is often the better choice, and we say so in the scope.

We walk the membrane, check seams, drains, scuppers, and parapets, and photograph what we find. You get a written scope with the membrane named.
EPDM or TPO, chosen for the roof, the slope, and the penetrations. The choice is written into the scope.
A re-roof inside the city needs a City of Houston permit. The permit is part of the written scope.
Tear-off to the deck where the deck or insulation has failed, or a recover where the existing system can carry it. The choice is made on what the inspection shows.
We walk the roof with you and hand over the photos of the membrane, seams, and drains for your records.

Presses glued and taped seams flat so the bond holds.
Bonds EPDM seams and flashing. The seam work is the craft on an EPDM roof.
Checks the deck and insulation for hidden moisture before new material goes on.
Takes a small core sample so the layers, insulation, and deck can be seen, not guessed at.
Checks that interior drains and scuppers can move the water Houston rain delivers.
Keep membrane courses straight and cut clean edges at parapets and penetrations.
Picks up fasteners and debris from the roof and the ground below.
Safe access and staging across large flat roof areas.
Seals flashing joints and penetrations as part of the work.
Photos of the membrane, seams, and finished roof go into your file.

The old membrane had failed at the seams and the deck beneath it was soft. We tore off to the deck, replaced the soft sheathing, and installed EPDM with tapered insulation.
The addition had a straightforward membrane with few penetrations. EPDM fit the roof, and we installed it with new flashing and working drains.
The membrane had failed at a skylight curb. We replaced the membrane, re-flashed the curb, and photographed the work for the file.
EPDM is the quieter single-ply membrane in Houston, on townhome flat decks and bungalow additions where the roof is simple and the seams can be kept dry. Midtown and EaDo townhomes carry it, and the 1993 to 2008 cohort is expiring at once. The choice between EPDM and TPO is made for the roof, not for the brochure. Where storm damage is involved, the roof insurance claims page explains how a claim works in Texas. Call (936) 873-7200 to talk through an EPDM roof.
The 1993 to 2008 townhome wave is expiring all at once. Flat membranes are in the delamination and blister zone.
New townhome flat roofs ponding within years, where ponding was not addressed at build.
The two-roof house: a pitched main roof and a flat addition membrane, often under historic district review.
High-rise flat membranes and parapet ponding, where the membrane age and the residential conversion age are different numbers.
Bungalow additions and garage apartments with flat membranes, beside pitched main roofs.
the failure that kills flat membranes. Drains, scuppers, and tapered insulation are part of every scope.
EPDM is glued or taped and usually black. TPO is welded and white. Both fit Houston flat roofs.
A flat section over the garage that ponded, with seams failing and a soft deck beneath it.
We tore off to the deck, replaced the soft sheathing, and installed EPDM with tapered insulation. The ponding stopped.
Maintenance: Check the building's own HOA, not a neighbourhood HOA. Midtown has dozens of project-level HOAs.
A simple flat addition with a membrane past its life and drains that could not keep up.
We installed EPDM with new flashing and working drains, and left the pitched main roof alone.
Maintenance: Clear the addition's drains and scuppers each autumn. Ponding is what kills a flat membrane.
A flat deck leaking at a skylight curb, with the membrane failed at the flashing.
We replaced the membrane and re-flashed the curb. The leak stopped.
Maintenance: Check skylight curbs and penetrations each year. On a flat roof, the flashing is the leak point.
EPDM roof problems in Houston trace back to seams, ponding, and membranes past their life. Here is what we fix.
EPDM seams are glued or taped, and the bond is the weak point as the membrane ages. We inspect seams on every EPDM job and say plainly whether repair or replacement is the honest answer.
Standing water rots decks even under a membrane that tolerates it. We check drains, scuppers, and slope, and re-slope with tapered insulation where the roof has true zero-slope areas.
On a flat roof, most leaks start at curbs, vents, and parapet transitions. We re-flash curbs and penetrations as part of the scope.
A 1990s flat membrane is at or past its life now. We inspect, core-sample where needed, and say whether repair or replacement is the honest answer.

Our crews work on Houston EPDM roofs every week, from Midtown townhomes to Heights bungalow additions. Every job is photographed at the membrane, seam, and drain stages, and the permit inspection is part of the job. That is what a building owner can actually check: the photos, the permit, and the written scope.

“I hired Thomas Family Roofing for a flat roof repair after hearing good things from friends and reading strong reviews. The whole experience was smooth and professional from start to finish. They also cleaned out the roof drains since they were clogged.”
“From our first call with Thomas Family Roofing, it was clear they were focused on giving us a quality new roof and making the whole roofing process easy to understand.”
“I had storm damage on my roof, and after the first insurance adjuster met with another roofing company, the claim was not approved for roof repair. My niece suggested I call Johnathan, and he came out, met with a different adjuster, and helped get the roof replacement approved.”
Rating 4.9 out of 5 from 46 Google reviews (42 five-star, 4 four-star). A further 41 reviews are visible only as an aggregate on Google. See all reviews on Google.
Published Texas sources put EPDM at $4 to $8 per sq ft in one range and $11 to $16 in another, a gap that comes from different scopes, not error. These are published market ranges, not this business's prices. The scope is labelled every time.
EPDM is a rubber membrane with glued or taped seams, usually black, and it absorbs heat. TPO is heat-welded at the seams and white, so it reflects summer sun. Both fit Houston flat roofs. The choice is made for the roof and written into the scope.
Better than most membranes, but it still lasts longer when it sheds water. Standing water rots decks even under a membrane that tolerates it, so drainage and tapered insulation are part of every scope.
EPDM life depends on the seams, the drainage, and the rooftop heat. A 1990s membrane is at or past its life now. We inspect and say whether repair or replacement is the honest answer.
Not seeing your question? Call (936) 873-7200 and talk it through with the local team.
Ask the local teamCall (936) 873-7200 and tell us what you are seeing. We will talk through what is happening, what an inspection covers, and the next step. Or send a service request with the form and we will call you back.