Fascia repair by Thomas Family Roofing in Houston
Rot found early, fixed on solid wood

Fascia Repair Houston TX: Stop Rot Before It Reaches the Roof

The fascia board is the strip of wood the gutter hangs from — and the first piece of wood Houston rain reaches when a gutter overflows, a drip edge fails, or a downspout backs up. Once it softens, hangers pull out, the gutter sags, and water finds the soffit and the roof deck. We probe the fascia, find the water source, replace the rotten boards, reset the drip edge, and re-hang the gutter on solid wood.

Rot probed, not guessedDrip edge resetCall (936) 873-7200

Clear scope before work

You see the written scope and the price before any work starts.

Roof-first thinking

Gutters, fascia and downspouts are treated as part of the roof water system, not an add-on.

Photos of what we find

We photograph the fascia, hangers and outlets so you can see the problem yourself.

Local accountability

A Houston roofing company at 5507 Lyons Ave — call (936) 873-7200 and talk to the team.

What is included

What Our Fascia Repair Includes

A fascia repair starts by finding where the water came from. Here is what a repair visit covers.

01

Full roofline probe

We probe the fascia along every run, not just the visibly bad section. Rot spreads behind paint, and the soft board next to the bad one is usually next.

02

Water source diagnosis

Fascia rots because water reaches it — from an overflowing gutter, a failed drip edge, or a backed-up downspout. We find the source before we replace the wood.

03

Board replacement and splicing

Rotten sections are cut out and replaced with matching boards, spliced so the joint is sound and the line stays straight.

04

Drip edge reset

The drip edge is reset so water sheds into the gutter instead of behind it. A gap at the drip edge is the most common cause of fascia rot we see.

05

Gutter re-hang

The gutter is re-hung on the new boards with hangers on 24-inch centers, pitched correctly, and water-tested.

06

Cleanup and photo documentation

Debris is hauled off and you get photos of the rot we found and the boards we replaced.

PLAN

Request a service estimate

Tell us what you are seeing — a sagging gutter, peeling paint at the eave, or a soft spot behind the run — and we will arrange an inspection and a written scope.

Request estimate
Service overview

What Fascia Repair Houston TX Really Involves

Fascia repair in Houston is probing the board to find how far the rot has spread, finding the water source that caused it, replacing the rotten sections, and re-hanging the gutter on solid wood.

Fascia rot is almost always a water problem with a roof cause. A gutter that overflows in a Houston burst, a drip edge with a gap, a downspout that backs up — each one soaks the same board, and the board rots from the inside out. Paint hides it until the hangers pull out.

That is why we probe before we quote. The visibly bad section is rarely the whole story, and replacing one board while the next one is soft is a repair that comes back in a year.

  • Probe, don’t guess — We probe the fascia along the full run. Rot spreads behind paint, and the board beside the bad one is usually soft too.
  • Find the water source — Replacing the board without fixing the water source — drip edge, gutter pitch, downspout — just rots the new board.
  • Drip edge is the usual culprit — A gap at the drip edge sends water behind the gutter instead of into it. Resetting it is part of every fascia repair we do.
  • Written scope with photos — You get photos of the rot and a written scope of what is being replaced, so you can see the problem yourself.
The service timeline

How Our Fascia Repair Process Works

01

Call and describe it

Tell us what you are seeing — a sagging gutter, paint peeling at the eave, or a soft spot you can press with a finger.

02

Walk and probe

We walk the roofline and probe the fascia along every run, checking the drip edge and the gutter hangers as we go. Photos are taken of what we find.

03

Find the water source

We work out where the water came from — overflowing gutter, failed drip edge, or backed-up downspout — and explain it in plain terms.

04

Replace and re-seal

Rotten sections are cut out and replaced, the drip edge is reset, and the new boards are sealed so the joint is sound.

05

Re-hang and test

The gutter is re-hung on the new boards, pitched correctly, and water-tested. Debris is hauled off and the job is walked with you.

Fascia repair inspection and diagnostic work in Houston
Tools and methods

Tools and Methods We Use on Fascia Repairs

01

Moisture probe

Probes fascia and soffit for hidden rot. What looks solid from the ladder is often soft behind the gutter.

02

Pry bars and saws

Rotten sections are cut out cleanly and spliced so the joint is sound and the line stays straight.

03

Drip edge stock

The drip edge is reset so water sheds into the gutter instead of behind it — the most common cause of fascia rot we see.

04

Hidden hangers and screws

The gutter is re-hung on the new boards with hangers on 24-inch centers, screwed into solid wood.

05

Levels

Pitch is checked with a level before the gutter goes back up, so water moves instead of sitting against the new boards.

06

Water test

Running water through the system proves the drip edge, the gutter and the fascia are working together before we leave.

Where this service helps

When Houston Homeowners Call Us for Fascia Work

Fascia repair example on a Houston home

The gutter sags and the fascia feels soft behind it.

Hangers pulling out of rotten wood. We probe the full run, replace the soft boards, and re-hang the gutter on solid wood.

Paint is peeling at the eave and the soffit is stained.

Water is getting behind the gutter — usually a drip edge gap or an overflowing run. We find the source, reset the drip edge, and replace the rotten boards.

A Heights bungalow has shallow fascia and a gutter that keeps pulling loose.

Older bungalows have shallow fascia that rots fast once water reaches it. We replace the boards, reset the drip edge, and re-hang with hangers set to the wood.

A flat-roof townhome in Midtown has water staining at the parapet.

Scuppers and interior drains that back up soak the fascia and the parapet. We check the drain, the scupper and the fascia as one path.

Local execution

How Fascia Repair Runs in Houston

Houston is hard on fascia because Houston is hard on gutters. About 52 inches of rain a year in short, intense bursts, pine needles and oak leaves packing the outlets, and flat-roof scuppers backing up on townhomes — all of it ends with water sitting against the fascia board. Once the board softens, the hangers pull out and the gutter sags, and the rot spreads to the soffit and the roof deck.

01

The Heights and Montrose

Many 1920s and 1940s bungalows have shallow fascia and period trim. The wood rots fast once water reaches it, and the drip edge is often the original.

02

Kingwood

Pine needles pack the gutters and the valleys, and once gutters fill, rain backs up under the first row of shingles and rots the decking along the eaves.

03

Meyerland and Braeswood

Low-slope ranches shed water slowly, and the eaves work hard. A drip edge gap here soaks the fascia every rain.

04

Midtown and EaDo

Townhome flat roofs drain through scuppers and interior drains. A blocked scupper soaks the fascia and the parapet together.

05

River Oaks and Memorial

Large, complex rooflines with long runs and many corners. Corners are where water gets behind the gutter first.

06

Harvey-intensity rain

A gutter that copes in a drizzle overflows in a burst, and the overflow soaks the fascia. We fix the water source — pitch, drip edge, downspout — not just the board.

Before and after

What a successful service visit changes.

A sagging gutter on a 1950s ranch

Before

A 1950s ranch in Oak Forest had a gutter sagging between hangers, with fascia so soft behind the worst run that a finger pressed straight through the paint.

After

We probed the full run, replaced three soft boards, reset the drip edge, and re-hung the gutter on solid wood with hangers on 24-inch centers. Water-tested and dry.

Keep it working: Check the eave paint each spring. Peeling paint at the fascia is the earliest sign water is getting behind the gutter.

Peeling paint and a stained soffit

Before

A home in Montrose had paint peeling at the eave and a stained soffit. The drip edge had a gap, and every rain sent water behind the gutter.

After

We reset the drip edge, replaced the rotten fascia, and re-hung the gutter. The soffit dried out and the paint stays put.

Keep it working: Keep the gutters clear. A clogged run overflows at the same spot the drip edge was fixed.

A townhome parapet soaking through

Before

A Midtown townhome had water staining at the parapet and soft fascia below the scupper. The interior drain was blocked and the scupper was backing up.

After

We cleared the drain and scupper, replaced the soft fascia, and the flat section drains again. The staining stopped at the source.

Keep it working: Check flat-roof drains after every heavy rain. A blocked drain ponds water fast.

Problems we solve

Fascia Problems We Fix Before They Spread

Most of the expensive damage we see in Houston started as a small fascia problem. Here are the ones we run into most and how we stop them.

01

Rot behind the gutter

Water gets behind the gutter from a failed drip edge or an overflowing run, and the fascia rots from the inside out. We probe the full run and replace every soft board.

02

Hangers pulling out

Hangers screwed into soft wood pull out, and the gutter sags. The fix is new boards first, then re-hanging on solid wood.

03

Drip edge gaps

A gap at the drip edge sends water behind the gutter instead of into it. Resetting the drip edge is part of every fascia repair we do.

04

Soffit staining and rot

Once the fascia goes, the soffit is next. We check the soffit while the gutter is down and flag anything soft in writing.

Check before you hire

What to check before you hire a Houston roofer

4.9 out of 5 on Google46 Google reviews — 42 five-star and 4 four-star, as shown on our Google profile
Texas has no state roofing licenceTexas does not license roofing contractors, and no state roofing licence exists to check — a bill to create one, HB 3344, died in May 2025
City of Houston re-roof permitA residential re-roof inside Houston needs a City roofing permit, with plan review and inspection — ask any roofer how they handle it
Written scope and photosAsk for the scope in writing, photos of the problem, and a clear statement of what is and is not included before you agree to anything
Fascia repair professional working on a Houston roofline
Technical expertise

Fascia Repair Experience You Can Check

Fascia repair is water-source work. The board is the symptom; the drip edge, the gutter pitch or the downspout is the cause. We find the cause, show you photos of the rot, replace the boards on solid wood, and prove the whole path with water before we leave.

  • Full roofline probe with photos before any board is replaced
  • Water source found first — drip edge, gutter pitch or downspout
  • Drip edge reset on every repair, so water sheds into the gutter
  • Gutter re-hung on solid wood, hangers on 24-inch centers
  • Every repair water-tested before we leave
Roofing professional preparing equipment for a Houston roof job
Customer stories

What Houston Homeowners Say

Rated 4.9 out of 5 from 46 Google reviews. The excerpts below are from our Google profile — short excerpts only, with the reviewer’s name, rating and the date Google shows.

Leonardo A5 stars ★ · 4 months ago

“They replaced an old cracked skylight on the roof of my two-story home, and i was very pleased with the whole roofing process. From the first call back to the roof inspection, estimate, and final installation, everything was handled on time…”

Google review · Attic venting repairs, gutter installation, roof inspection · Read on Google

bryan ball5 stars ★ · 4 months ago

“From our first call with Thomas Family Roofing, it was clear they were focused on giving us a quality new roof and making the whole roofing process easy to understand. Miguel explained the scope of the roof replacement, the materials and shingle options…”

Google review · Roof repair for storm & wind damage · Read on Google

Chelsea Powell5 stars ★ · 3 months ago

“We contacted Thomas Family Roofing for an estimate on repairs for our metal roof in Houston. Luis came out, inspected the roof in person, and explained clearly what needed attention, including a few details about flashing and panel areas that other roofers had missed.”

Google review · Attic venting repairs, gutter installation, roof inspection · Read on Google

How do I know if my fascia is rotted?

Press it. Soft wood, paint peeling at the eave, a gutter that sags or pulls away, and staining on the soffit are the signs. Rot spreads behind paint, so the board beside the visibly bad one is often soft too — we probe the full run to find how far it has gone.

What causes fascia rot in Houston?

Water reaching the board — from a gutter that overflows in a heavy rain, a drip edge with a gap, or a downspout that backs up. Pine needles and oak leaves packing the gutters make it worse, because the overflow soaks the same board every storm.

Can you replace just the rotten section?

Yes, in most cases. Rotten sections are cut out and spliced with matching boards so the joint is sound and the line stays straight. If the rot runs the full length, the whole board is replaced.

Do I need to fix the gutter too?

Usually, yes — the gutter is part of the cause. The drip edge is reset, the gutter is re-hung on the new boards and pitched correctly, and the whole path is water-tested. Replacing the board without fixing the water source just rots the new board.

How long does fascia repair take?

Most fascia repairs are done in a day once the scope is agreed. The inspection and the written scope come first, so you know exactly which boards are being replaced and why.

Still unsure?

Ask the local team

Call Thomas Family Roofing at (936) 873-7200 and describe what you are seeing — we will tell you honestly whether it needs a visit or can wait for an inspection.

Call (936) 873-7200
Here when the problem will not wait

Get Your Fascia Repair Houston TX Estimate

Rot spreads with every storm. Call Thomas Family Roofing at (936) 873-7200 and tell us what the eave looks like — we will arrange an inspection and give you a written scope with photos.

Contact the local team

Call Thomas Family Roofing

Call (936) 873-7200 and tell us what you are seeing — a sagging run, water at the slab, or a gutter that overflows every storm. We will arrange an inspection and give you a written scope before any work starts. Or send a service request through the form and we will call you back.

Request received. We will be in touch shortly.

Call now